Tools

Components>Accessories>Insulated Metal Panel Accessories>Tools

This tool is used to help with the sealant placement and location of endlap screws
One required per project
Profile – CFR 30″,36″ and 42″

CFR Endlap Assembly Guide


The Seam Clamp is used at endlaps to help hold module. Two recommended per project
Profile – CFR

CFR Seam Clamp 6R


The Rib Clamp is used to pull the Male and Female ribs together during installation to insure that the tongue and groove joint is fully engaged 
Quantity: 
The number of Rib Clamps will vary with the length of the panels
Provide enough clamps to allow (1) clamp at each end and (1) clamp every 10′ for the longest panel length
Profile – CFR

CFR Rib Clamp 11R


The Hand Seamer is used to crimp each roof sidelap at the eave and ridge end of the panels and at the roof panel endlaps prior to using the Motorized Seamer
One required per project
Profile – CFR

Insulated BattenLok®/CFR Hand Crimper


For installing gasket at Grand H butt joints

Gasket Installation Tool

Wall System Length
Horizontal 10″

For gauging gap at Architectural Panel butt joints

Vertical Joint Gauge

Wall System Length Type
Horizontal 7″ Plastic

Hanger Rod Connector

Size Length Finish
3/8″ 2″ Plated