Coils and Flat Sheets

Components>Accessories>Standing Seam Roof Accessories>Coils and Flat Sheets

All coils are subject to ± 15% of quantity ordered
The camber tolerance for coils is one inch in any 20 feet
Slitting available upon request
All material is Grade D or E
See Flat Sheet and Coil Selection Chart for color availability

Coils

Gauge Width Finish
24 42 3/4″ Signature® 200
24 42 3/4″ Galvalume Plus®
24 42 3/4″ High Gloss White
24 48 3/8″ Signature® 300 Metallic
24 48 3/8″ Signature® 300
24 48 3/8″ Signature® 200
24 48 3/8″ Galvalume Plus®
22 42 3/4″ Signature® 200
22 42 3/4″ Galvalume Plus®
22 48 3/8″ Signature® 300 Metallic
22 48 3/8″ Signature® 300
22 48 3/8″ Signature® 200
22 48 3/8″ Galvalume Plus®

Strippable film available for flat sheets (except for “Low Gloss Paint Finish Systems”) upon request.
Flat sheet lengths other than 10′-2″ are available upon request. Minimum length 5′-0″, maximum length 14′-0″. Flat sheet lengths over 14′-0″ require special skid. Please inquire
All material is Grade D
See Flat Sheet and Coil Selection Chart for color availability

Flat Sheets

Gauge Width Finish
24 42 3/4″ Signature® 200
24 42 3/4″ Galvalume Plus®
24 42 3/4″ High Gloss White
24 48 3/8″ Signature® 300 Metallic
24 48 3/8″ Signature® 300
24 48 3/8″ Signature® 200
24 48 3/8″ Galvalume Plus®
22 42 3/4″ Signature® 200
22 42 3/4″ Galvalume Plus®
22 48 3/8″ Signature® 300 Metallic
22 48 3/8″ Signature® 300
22 48 3/8″ Signature® 200
22 48 3/8″ Galvalume Plus®