Rake Support

Components>Accessories>Standing Seam Roof Accessories>Rake Support

Use with Low Clips

Rake Support – Low

SSR System	Size	Gauge	Length	Finish
UD & DL	3 3/8″ x 2 1/2″	14	20′-0″	Red Oxide
UD & DL	3 3/8″ x 2 1/2″	14	20′-0″	Galvanized
BL & SLK	2 3/8″ x 3 1/2″	14	20′-0″	Red Oxide
BL & SLK	2 3/8″ x 3 1/2″	14	20′-0″	Galvanized

Use with High Clips

Rake Support – High

SSR System	Size	Gauge	Length	Finish
UD & DL	4 3/8″ x 1 1/2″	14	20′-0″	Red Oxide
UD & DL	4 3/8″ x 1 1/2″	14	20′-0″	Galvanized
BL & SLK	3″ x 2 7/8″	14	20′-0″	Red Oxide
BL & SLK	3″ x 2 7/8″	14	20′-0″	Galvanized

Use with Utility Clips

Rake Support – Utility

SSR System	Size	Gauge	Length	Finish
UD	3″ x 2 7/8″	14	20′-0″	Red Oxide
UD	3″ x 2 7/8″	14	20′-0″	Galvanized
BL & SLK	2″ x 3 7/8″	14	20′-0″	Red Oxide
BL & SLK	2″ x 3 7/8″	14	20′-0″	Galvanized

Use with Double-Lok® roof system only
Use with 2″ Sliding Hi-Thermal Clips

Rake Support 2″ Standoff

SSR System	Size	Gauge	Length	Finish
DL	5″ x 2 15/16″	14	20′-0″	Red Oxide

Used at edge zones when tighter clip spacing is required

Retro-Fit Clip Zee

SSR System	Gauge	Length	Finish
DL	14	10′-6″	Red Oxide
DL	12	10′-6″	Red Oxide

Used at the eave when installing Ultra-Dek® or Double-Lok® over existing R panel roof
Specify existing roof slope

Retro-Fit Eave Angle

SSR System	Gauge	Length	Finish
DL	16	8′-0″	Galvanized
DL	14	8′-0″	Galvanized
DL	12	8′-0″	Galvanized