Components>Trim>Standing Seam Roof Trim>End Trim and Straps
Box Panel Cap Trim
| Length | Girth |
| 10′-2″ | 8″ |
Double-Lok® Repair Caps are made from .060″ extruded aluminum
Mill Finish in stock
Length – 10′-3″
Double-Lok® Repair Cap
Specify roof slope or angle indicated on drawing
Offset Panel Cap Trim
| Length | Girth |
| 10′-2″ | 7 1/2″ |
Downspout Strap
| Length | Girth |
| 1″ | 10″ |
BattenLok® HS – SLX Box End Cap
BattenLok® HS – SLX Standard End Cap
Specify left or right
BattenLok® HS – SLX Snow Large End Cap
Specify left or right
BattenLok® HS – SLX Sidewall Large End Cap
Specify left or right
Specify roof slope
Style High Side Eave End Cap
Field cut to fit Parapet Flashing profile
Parapet Corner Box
| Length | Girth |
| 18″ | 18″ |
Specify roof slope
Sculptured Low Eave Corner Box
Field cut to fit Ridge Flashing profile
16″ or 14″ Girth
Parapet Peak Box
Fixed Peak Box – Sculptured Rake
| Length | Girth | Roof Slope |
|---|---|---|
| 1′-6″ | 21″ | 1/2-6:12 |
| 2′-6″ | 21″ | 1/2-3 3/4:12 |
Specify roof slope
Floating Peak Box – Sculptured Rake
| Length | Girth | Roof Slope |
|---|---|---|
| 1′-6″ | 33 1/4″ | 1/4-6:12 |
| 2′-6″ | 37 1/4″ | 1/4-6:13 |
24 gauge material
Specify Left or Right
Box Gutter End Cap
24 gauge material
Box Gutter Strap
| Length | Girth |
| 10″ | 2″ |
Use with Sculptured Gutter
Use with Style Gutter
Gutter Strap
| Length | Girth |
| 10″ | 2 1/4″ |
SLX Gutter Hanger
| Length | Girth |
| 18″ | 6 1/8″ |
End Caps will be made to fit gutter ordered
Specify left or right
Gutter Ends
Use with FL-110 or FL-111 Sculptured Rake Trim
Specify left or right
Sculptured Rake End
